Stump Removal Without Stump Grinding
Your tree was cut down. What you need now is a strategy for removing tree stumps. What is the best way to perform the task? Stump grinders can be rented and are quick and easy but are expensive. Manual tree stump removal is cheap but has the drawback of being labor-intensive. Here is another alternative but it takes time.
1.The first step is your decision on which technique to make use of for tree stump removal. In the event you go for manual tree stump removal, use a mattock. Its broad finish allows you to dig around the stump; the other end functions as an axe for chopping your way via tree roots. Dig and chop your way under the root ball towards the taproot. For large tree stump removal, taproots might be imposing enough to need cutting with a full-size axe.
2.The rest of this short article concentrates on an additional technique for tree stump removal, that is essentially a method to accelerate the natural processes that would ultimately break down the stump anyhow – even if you didn’t lift a finger. But nature’s tree stump removal method is awfully slow. To hurry nature along, you’ll be supplying two ingredients in unnatural quantities to speed up the rotting procedure: nitrogen and water. Tree stump removal will nonetheless be slow this way, but it’s an improvement over nature.
3.But first using a chain saw, cut the stump down as close to the ground as you are able to, without the chain saw’s teeth hitting the ground (this would dull your chain).
4.Drill holes a few inches deep into the stump in several locations, using your widest drill bit. The wider and deeper the holes, the better.
5.Fill these holes first with water, then with a fertilizer high in nitrogen. For example, you could use cow manure. If you’re using a commercial fertilizer instead, make sure the very first of the three numbers of the fertilizer’s NPK will be the highest (for example, a straight nitrogen fertilizer like 45-0-0).
6.Soak the ground all around the stump. Cover the stump with a plastic tarp. The tarp will act as a barrier to help retain moisture in and around the stump. Moisture is really an effective ally to possess on your side for tree stump removal.
7.Apply an organic mulch over the plastic tarp, and water it completely. An organic mulch, like tree bark or hay, will hold extra moisture, keeping the region even wetter. Wet mulch is also heavy, which will weigh the tarp down, to ensure that it doesn’t blow away.
8.The final factor you need to do for this tree stump removal project is — to become patient! You’re speeding up the natural procedure of rotting by using the actions above, but this tree stump removal method is still not for those who need the stump gone today.
9.You’ll reduce the wait for completion of your tree stump removal project, however, by periodically removing the mulch and tarp for a moment and once more completely soaking the stump and also the ground around it. In the event you still have that nitrogen supply at your disposal, add more of it. Then reapply the plastic tarp and mulch. Soak the mulch once more, too, to help keep the tarp wet and weighed down.
